Panasonic HomeHawk

Usage examples
Introduction
This section describes commonly used system features, the devices required for each example, and
briefly explains the required settings.
I want to view live camera images while I’m out
While away from home, you can view live camera images.
Required devices
R Front door camera (KX-HNC700, KX-HNC705)/Outdoor camera (KX-HNC710, KX-HNC715)
– Mobile device (smartphone or tablet) with an Internet connection
– Wireless router
– Access point (KX-HNB700, KX-HNB705)
R HD Camera (KX-HNC800, KX-HNC805, KX-HN1003)
– Mobile device (smartphone or tablet) with an Internet connection
– Wireless router
Required procedures
R Access point initial setup and mobile device registration
Refer to the Installation Guide included with your access point.
R Device registration (if you didn’t purchase the device as part of a pre-configured bundle)
Refer to the Installation Guide included with your device.
R Use the [HomeHawk] app to access the desired camera.
– Front door cameras and outdoor cameras: See “Viewing the live camera image screen”, Page 44.
– HD Camera: See “Viewing live HD camera images”, Page 62.
I want to know if someone approaches my home while I’m
out
While away from home, you can receive a notification on your mobile device if it is detected that
someone approaches your home.
Required devices
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Access point (KX-HNB700, KX-HNB705)
R Front door camera (KX-HNC700, KX-HNC705) or outdoor camera (KX-HNC710, KX-HNC715)
Required procedures
R Access point initial setup and mobile device registration
Refer to the Installation Guide included with your access point.
R Device registration (if you didn’t purchase the device as part of a pre-configured bundle)
Refer to the Installation Guide included with your device.
R Use the [HomeHawk] app to configure a mode or use a preset mode. See “Mode settings
(overview)”, Page 28 or “Preset modes”, Page 29.
10
Welcome to the HomeHawk!