To Next PageTo Next PageWhat to do if my Panasonic Camcorder won't turn on or operate normally?
Remove the battery or AC adapter, wait about a minute, and then reconnect them. After another minute, try turning the unit on again. Note that doing this while the media is being accessed may damage the data. If the issue persists, disconnect the power and contact customer support.
Why is there no video or audio output from my Panasonic Camcorder to the TV?
Please read the operating instructions of your TV and select the channel that matches the input used for the connection. Change the [TV ASPECT] setting to match the aspect ratio of the TV.
Why does my Panasonic HX-DC3 Camcorder battery run down quickly?
The battery might need recharging, or the AC adapter needs to be connected. In cold environments, battery life decreases. Also, ensure the battery is correctly inserted, paying attention to its orientation.
What to do if my Panasonic HX-DC3 displays an error message?
Check the following: remove and reinsert the SD card, remove and reinsert the battery, and try a different SD card. If the message persists after these steps, disconnect the power and contact customer support.
How to fix out of focus image on Panasonic HX-DC3 Camcorder?
Hold down the power button until the LCD monitor turns off, then turn the power back on. If the [FOCUS] is set to (MANUAL), do the same, then reconfigure the Manual Focus.
What to do if my Panasonic HX-DC3 Camcorder stops recording arbitrarily?
Ensure you are using an SD card suitable for motion picture recording. The recordable time may be reduced due to data writing speed deterioration or repeated recording and deletion. Try formatting the SD card or built-in memory using the unit.
Why is my Panasonic Camcorder turning off automatically?
The camcorder might be turning off automatically because the ECONOMY function activates after approximately 5 minutes of inactivity to save power. If you are not using VIERA Link, disable it in the settings.
Why is the high temperature warning icon blinking on my Panasonic HX-DC3 Camcorder?
The battery or internal temperature is too high. Allow the unit to cool down before using it again.
Why is the high temperature warning icon displayed on my Panasonic Camcorder?
The battery or unit's internal temperature is too high. Allow the unit to cool down before attempting to record again.
How to fix noise in Panasonic HX-DC3 Camcorder recording image?
If the [ISO] setting is too high, it can cause noise in recorded images. Try lowering the ISO sensitivity setting.
General| Video Resolution | 1920 x 1080 |
|---|---|
| Sensor Type | MOS |
| Optical Zoom | 12x |
| LCD Screen Size | 3.0 inches |
| Digital Zoom | 700x |
| Display Type | LCD |
| Supported Flash Memory | SD, SDHC, SDXC |
| Video Format | AVCHD, MP4 |
| Image Stabilizer | Optical |
| Storage Media | SD Card |
| Battery Type | Lithium-ion |
| Optical Sensor Size | 1/2.33 inches |
