Why are parallel single line telephones not ringing (Panasonic)?
If parallel single line telephones are not ringing, the “no ring” setting may be selected. To resolve this, change the setting to ring.
Why is Panasonic HYBRID IP-PBX KX-TDA200 Telephone showing "Restricted" or a reorder tone?
If your Panasonic Telephone displays "Restricted" or you hear a reorder tone, it could be due to several reasons: your telephone may be locked, toll restriction might be activated, or an account code may be required.
What to do if some features do not work on my Panasonic Telephone?
If some features on your Panasonic Telephone aren't working, it may be because system management has restricted certain features. Alternatively, the feature numbers may have changed. Confirm the revised number and try again.
What to do if I cannot use the Panasonic HYBRID IP-PBX KX-TDA200 Telephone?
If you cannot use the Panasonic Telephone, it might be locked. If so, unlock your telephone. Alternatively, your telephone could be connected to an eXtra Device Port, which requires system programming. Consult your dealer in this case.
Why can't I make an outside call using One-touch Dialling button or speed dialling on my Panasonic Telephone?
If you're unable to make an outside call using the One-touch Dialling button or speed dialling on your Panasonic Telephone, a line access number might not have been stored. A line access number is required for outside calls.
What does it mean when the MESSAGE button light is lit on my Panasonic HYBRID IP-PBX KX-TDA200?
The MESSAGE button light on your Panasonic Telephone indicates that another extension left you a message waiting indication while you were on the phone or away from your desk.
What to do if my Panasonic HYBRID IP-PBX KX-TDA200 does not work with personal settings?
If your Panasonic Telephone doesn't work with personal settings, the extension line may have been changed. Clear the previous telephone's settings, and then program your desired settings again.
What to do if my Panasonic proprietary telephone does not have a feature button?
If your Panasonic proprietary telephone doesn't have a feature button, it may be because some models do not have one. In this case, change a flexible button to the desired button or enter the specified feature number instead of using the feature button.
What to do if Panasonic HYBRID IP-PBX KX-TDA200 line is disconnected while talking to an outside party?
If your Panasonic Telephone line is disconnected while talking to an outside party, the time limit may have run out.
Why does Panasonic HYBRID IP-PBX KX-TDA200 redialling not function?
Redialling on your Panasonic Telephone may not function if the stored number was more than 32 digits or an extension number.
General| VoIP Support | Yes |
|---|---|
| Digital Extensions | Up to 128 |
| ISDN Support | Yes |
| Networking | Yes |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Type | Hybrid IP-PBX |
| Maximum IP Extensions | 64 |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% (non-condensing) |
| VoIP Trunks | 32 |
| Trunk Capacity | Up to 64 CO lines |
| Weight | Approx. 15 kg |
To Next Page