To Next PageTo Next Page
Need help?Do you have a question about the Panasonic KX-TGF872C and is the answer not in the manual?
General| Frequency | 1.9 GHz |
|---|---|
| DECT 6.0 | Yes |
| Number of Handsets | 2 |
| Answering System | Yes |
| Answering Machine Recording Time | 18 minutes |
| Caller ID | Yes |
| Call Block | Yes |
| Talking Caller ID | Yes |
| Keypad on Base | Yes |
| Power Outage Backup | Yes |
| Battery Life (Talk Time) | Up to 10 hours |
| Battery Life (Standby) | Up to 5 days |
| Intercom | Yes |
| Headset Jack | Yes (2.5mm) |
| Call Waiting | Yes |
| Type | Cordless |
| Expandable Handsets | Up to 6 |
| Speakerphone | Yes |
| Range | Up to 1000 feet outdoors |
| Display | LCD |
Essential safety guidelines to prevent injury, electric shock, and fire hazards.
Guidelines for safe operation, medical device considerations, and installation precautions.
Step-by-step guide for connecting the base unit, charger, and installing handset batteries.
Identification and explanation of buttons, soft keys, and navigator key on the handset.
Identification of indicators, adaptors, and control types on the base unit.
How to make calls using the handset, base unit, and redial list.
Procedures for answering calls using the handset or base unit.
How to turn voice command on/off and adjust its sensitivity level.
Procedure for answering incoming calls using voice commands.
How the call block feature works to disconnect and log phone numbers.
Adding numbers manually or from the caller list to block incoming calls.
Configuring automated call blocking, allowed numbers, and access codes.
How to screen calls by prompting callers to say their names.
How to add, enter characters, and store entries in the phonebook.
Procedures for editing existing entries and erasing single or all entries.
Assigning numbers manually or from the phonebook to speed dial keys.
Adding numbers for outside calls or extension numbers to one-touch buttons.
How to set up the baby monitor for internal or external monitoring.
Information on adding and managing additional handsets for the base unit.
Procedures for registering and deregistering handsets with the base unit.
Overview of the answering system, memory capacity, and on/off control.
How to play greeting messages, listen to recorded messages, and control playback.
Setting remote access code, using remote commands, and turning system on remotely.
Step-by-step guide for calling in and operating the answering system remotely.
Explains common display messages and their causes/solutions.
Solutions for issues like check tel line, invalid handset, and no dial tone.
Solutions for unit not turning on, not working, or battery issues.
Solutions for error sounds, incorrect rings, and power failure operation.
Solutions for menu list issues, battery recharge, and call interference.
Solutions for no ringing, inability to make calls, or voice command issues.
Solutions for unit answering own calls, long distance, voice paging, and call block.
Solutions for caller announcements, time shifts, and 2nd caller information display.
Solutions for issues with recording messages or remote operation.
