Phonebook
Y
ou can add 100 names (16 characters max.) and
phone numbers (24 digits max.) to the phonebook,
and assign each phonebook entry to the desired
group (page 30).
Important:
R All entries can be shared by the base unit and
any registered handset.
Adding phonebook entries
Handset / Base unit
1 P
roceed with the operation for your unit.
Handset: MFN
a MM
ENUN
Base unit: M
N a MM
ENUN
2 MbN: “Add new entry” a MSELECTN
3 Enter the party’s name. a MOKN
4 Enter the party’s phone number. a MOKN
5 MbN: Select the desired group. a MSELECTN
2 times
6 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note for base unit:
R You can also add entries as follows:
Press M
N.
a MADDN a Go to step 3.
Entering characters
P
ress the dial key that corresponds to the desired
character. Press repeatedly to scroll through the
available characters.
The following operations are also available.
Key Operation
* Switch between the uppercase
and lowercase
(A « a)
MFN MEN Move the cursor
MC
LEARN Erase the character or number
R To erase all, press and hold it.
R T
o enter another character that is located on the
same dial key:
Handset: Press MEN to move the cursor to the
next space.
Base unit: Press M
N to move the cursor to
the next space.
R I
f you do not press any dial key within 2
seconds after entering a character, the
character is fixed and the cursor moves to the
next space.
Storing a redial list number to the phonebook
P
hone numbers of up to 24 digits can be stored in
the phonebook.
Handset
1 MEN
REDIAL
2 MbN: Select the desired entry. a MSAVEN
3 To store the name, continue from step 3,
“Editing entries”, page 30.
Base unit
1 MR
EDIALN
2 MbN: Select the desired entry. a MSAVEN
3 To store the name, continue from step 3,
“Editing entries”, page 30.
Note for handset and base unit:
R The name stored in the phonebook will be
reflected in the redial list after you make a call
using that phonebook entry.
Storing caller information to the phonebook
Handset
1 MCN
CID
2 MbN: Select the desired entry. a MMENUN
R To edit the number: MbN: “Edit” a
MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the desired format a
MSAVEN a MbN: “Phonebook” a
MSELECTN a Go to step 4.
3 MbN: “Save phonebook” a MSELECTN
4 Continue from step 3, “Editing entries”,
page 30.
Base unit
1 MC
IDN
2 MbN: Select the desired entry.
R To edit the number, press MEDITN
repeatedly until the phone number is shown
in the desired format.
3 MSAVEN
4 MbN: “Phonebook” a MSELECTN
For assistance, visit www.panasonic.ca/english/support
29
Phonebook
To Next Page
Loading...
