Using Call Display service
I
mportant:
R This unit is Call Display compatible. To use Call
Display features, you must subscribe to a Call
Display service. Contact your phone service
provider for details.
Call Display features
Handset / Base unit
W
hen an outside call is being received, the caller
information is displayed.
Caller information for the last 50 callers is logged
in the caller list from the most recent call to the
oldest.
R If the unit cannot receive caller information, the
following is displayed:
– “Unavailable”
*1
/“Unavailable Name &
No.”
*2
: The caller dials from an area which
does not provide a Caller ID service.
– “Private caller”: The caller requests not
to send caller information.
– “Long distance”: The caller makes a long
distance call.
R If the unit is connected to a PBX system, caller
information may not be properly received.
Contact your PBX supplier.
*1 Handset
*2 Base unit
Missed calls
Handset / Base unit
I
f a call is not answered, the unit treats it as a
missed call. The display shows “Missed call”.
Note:
R Even when there are unviewed missed calls,
“Missed call” disappears from the standby
display if the following operation is performed by
one of the units:
– A handset is replaced on the charger.
– Pressing MOFFN on a handset.
– Pressing MEXITN on the base unit.
Phonebook name display
W
hen caller information is received and it matches
a phone number stored in the phonebook, the
stored name in the phonebook is displayed and
logged in the caller list.
Talking Call Display
Handset / Base unit
T
his feature lets you know who is calling without
looking at the display.
To use this feature, you must:
– subscribe to a Call Display service of your
phone service provider.
– turn this feature on (page 36).
When caller information is received, the handsets
and/or base unit announce the caller’s name or
phone number received from your phone service
provider following every ring.
R Name pronunciation may vary. This feature may
not pronounce all names correctly.
R Call Display service has a limit of how many
characters can be displayed. If the caller’s name
is too long, the unit may not be able to display or
announce the entire name.
Phonebook name announcement
W
hen caller information is received and it matches
a phone number stored in the phonebook, the
stored name in the phonebook is announced.
For Call Waiting Deluxe service users
T
o use Call Waiting Deluxe, you must subscribe to
Call Waiting Deluxe from your phone service
provider. This feature not only allows the unit
currently in use to display the 2nd caller’s
information, but also offers you a variety of ways to
deal with the 2nd call.
Important:
R Please contact your phone service provider for
details and availability of this service in your
area.
R This feature must be turned on before it can be
used.
To turn Call Waiting Deluxe on/off
Handset / Base unit
T
o use Call Waiting Deluxe, you must turn this
feature on. The default setting is “Off”.
1 MMENUN#215
2 MbN: Select the desired setting.
3 MSAVEN
4 Proceed with the operation for your unit.
Handset: MOFFN
44
For assistance, visit www.panasonic.ca/english/support
Call Display Service
To Next Page
Loading...
