Note for handset and base unit:
R A
3.5 second pause is inserted each time you
press MDN (Pause) on the handset or MPAUSEN
on the base unit.
Answering calls
Using the handset
1 L
ift the handset and then press M
N
or MZN
when the unit rings.
2 When you finish talking, press MOFFN or place
the handset on the charger.
Any key answer: You can answer the call by
pressing any dial key (except 0 key).
Auto talk: You can answer calls simply by lifting
the handset (page 38).
Temporary handset ringer off: You can turn the
ringer off temporarily by pressing M
N
(left soft
key).
Using the base unit
When a call is being received, the SP-PHONE
indicator flashes rapidly.
1 Lift the corded handset or press MZN when the
unit rings.
2 When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press MZN.
Temporary ringer off: You can turn the ringer off
temporarily by pressing M
N.
Adjusting the ringer volume
Handset
P
ress MDN or MCN repeatedly to select the desired
volume while ringing.
R To turn the ringer off, press MCN repeatedly.
Base unit
P
ress MDN or MCN repeatedly to select the desired
volume while ringing.
R To turn the ringer off, press and hold MCN until
the unit beeps.
Note:
R To change the ringer volume and ringer tone for
an outside call, see page 36.
One-touch ringer off for the handset
P
ress and hold 0 (
) until the unit beeps to turn
t
he ringer off. While the ringer is turned off, the
handset will not ring for calls.
R You can turn the ringer on again by pressing
and holding 0 (
) until the unit beeps.
Useful features during a call
Hold
Handset
1 P
ress MMENUN during an outside call.
2 MbN: “Hold” a MSELECTN
3 To release hold, press M
N.
R A
nother handset user can take the call by
pressing M
N.
R T
he base unit user can take the call by
lifting the corded handset.
Base unit
1 P
ress MHOLDN during an outside call.
R If you are using the corded handset, you
can place it on the cradle.
2 To release hold, lift the corded handset.
R A handset user can take the call by
pressing M
N.
N
ote for handset and base unit:
R After holding for 10 minutes, the call is
disconnected.
Note for base unit:
R While an outside call is on hold, the SP-PHONE
indicator flashes.
Mute
Handset
1 P
ress MMUTEN during a call.
2 To return to the call, press MMUTEN.
Base unit
1 P
ress MMUTEN during a call.
R When the speakerphone is used, the
SP-PHONE indicator flashes.
2 To return to the call, press MMUTEN.
For assistance, visit www.panasonic.ca/english/support
17
Making/Answering Calls
To Next Page
Loading...
