Panasonic JU-475-4

@
Index Sensor (Orange)
Index Sensor (Red)
'---- Write Protect Sensor (Black)
'------- Write Protect Sensor (Green)
12.7 Cartridge Guide Assembly Removal and
Installation
(1) Remove the PCB as described in section 12.1.
(2) Remove
the handle and front plate as
described in section 12.2.
(3) Remove
the clamp assembly as described in
section 12.5.
(4) Remove
the write protect sensor mounting
screw.
(5) Remove
the three cartridge guide mounting
screws and take out the cartridge guide
assembly.
(6)
After reinstallation, adjust the collet assembly
as in section 12.4 step (6) and adjust the index
burst as in section 9.8.
(7)
When removing or reinstalling, be careful not
to damage the carriage arm with the lifter.
@
©
Index Sensor
Fig.12-7 Cartridge Guide Assembly Removal
Fig.12-6
Write Protect Sensor Assembly and
Index Sensor Assembly Removal
-17-