6.14. Automatic Route Selection
Automatic Route Selection is a feature which selects the least expensive carrier (network) service available, when making long
distance calls.
When area code(s) have been related to carrier codes, you will need only dial the area code, the lower costing carrier (network)
will automatically be dialled.
Please contact your telephone company regarding the carrier telephone charges.
6.14.1. Storing the Carrier Code(s)
Firstly you must subscribe to a second carrier (network) service. You can subscribe to a limit of 5 carrier services. Then store
the code as follows:
· To exit the operation, press any time.
· *1: The factory preset is 0000.
6.14.2. Storing the Area Code(s)
Store the area code(s) for which the chosen carrier (network) service charge rates are lower than the original carrier (network)
service. Up to 25 area codes can be stored.
· To exit the operation, press any time.
· *1: The factory preset is 0000.
· *2 If you need more area code storing, repeat the steps from 6.
18
KX-TCD4 10RUM / KX-TCD410RUS / KX-TCD412RU M / KX-TC D412RUS / KX-A141RUM / KX-A141RUS / KX-A142RUM / KX-A142RUS
To Next Page
Loading...
