Panasonic KX-F880 - Page 52

52
Programming the remote operation ID
The remote operation ID is used to access the answering device common memory.
Choose any 3-digit number except a number using digits 0 or 7.
Make sure that the first 2-digits of the remote operation ID are different from the mailbox password (page 46).
1
Press .
2
Press , then .
3
Press .
4
Enter the desired number.
5
Press .
6
Press .
MENU
START/COPY/SET
START/COPY/SET
1
1
MENU
Answering Device Remote Operation
Key Remote Command
Skips the greeting message
Repeats a message
Skips a message
New message playback
All message playback
Room monitor
Re-records a greeting message
Stops re-recording of a
greeting message
Erases a specific message
Erases all messages
Message transfer/Pager call ON
Message transfer/Pager call
OFF
8
2
8
1
5
4
9
7
6
5
4
2
1
0
1. Call your unit.
2. Enter the remote operation ID
during the greeting
message.
3. Press the remote command
key (see the right) within 4
seconds.
or
Wait for 4 seconds. All the
recorded messages will be
played back.
SYSTEM SET UP
REMOTE ANS ID
ID=111
2 3
4 5 6
7 8 9
0
1
START/COPY/SET
MENU
Dial keypad
Operating the answering device from a remote
phone
(cont.)
Display: