1. Introduction and Installation
13
For assistance, please visit http://www.panasonic.com/consumersupport
7 Lift the cover release lever (1) and open the
top cover (2).
Important:
L Close the multi-purpose input tray (3)
before opening the top cover.
L If the lower glass (4) is dirty, clean it with
a soft and dry cloth.
8 Install the drum and toner unit (1) by holding
the tabs.
L Make sure that the triangles (2) match to
install the drum and toner unit correctly.
9 Close the top cover, holding the cover
release lever (1). Then push the left side
(2) of the cover release lever firmly, until
locked.
Caution:
L To prevent injuries, be careful not to
put your hands under the top cover.
Toner save feature
If you want to reduce toner consumption, set the
toner save setting to ON (feature #482 on page
63). The toner cartridge will last approximately
40 % longer. This feature may lower the print
quality.
1
2
3
4
1
2
1
2
FLB851-PFQX2175YA-en.book Page 13 Thursday, September 8, 2005 2:24 PM
To Next Page
Loading...
