8. Programmable Features
57
8 Progra mmable FeaturesFeatures Summ ary
8.1 Programming
1 Press {MENU}.
2 Press {#} and the 3-digit code (page 61 to
page 68).
3 Press the desired selection to display the
desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 Press {MENU} to exit.
To cancel programming
Press {STOP}.
To select features by using the navigator
key
You can select a feature by using the navigator
key instead of directly entering the program code
(# and a 3-digit number).
1. Press {MENU}.
2. Select the feature’s category you wish to
program.
Press {<} or {>} repeatedly to display the
desired feature’s category.
– “BASIC FEATURE”
– “FAX FEATURE”
– “COPY FEATURE”
– “SCAN FEATURE”
– “LAN FEATURE”
L “SCAN FEATURE” and “LAN FEATURE”
will be displayed only when the optional
LAN board is installed.
3. Press {SET}.
4. Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
5. Press {V} or {^} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
6. Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
7. Press {MENU} to exit.
{SET}{<}{>}{V}{^}
{MENU}
{STOP}
FLB851-PFQX2175YA-en.book Page 57 Thursday, September 8, 2005 2:24 PM
To Next Page
Loading...
