Panasonic KX-FLB851

10. General Information
92
Specifications
10.2 Specifications
■ Applicable lines:
Public Switched Telephone Network
■ Document size:
Max. 216 mm (8
1
/
2
") in width, Max. 600 mm
(23
5
/
8
") in length
■ Effective scanning width:
208 mm (8
3
/
16
")
■ Effective printing width:
208 mm (8
3
/
16
")
■ Transmission time
*1
:
Approx. 4 s/page (ECM-MMR Memory
transmission)
*2
■ Scanning density:
FAX resolution:
Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch)-in
standard resolution,
7.7 lines/mm (196 lines/inch)-in fine/photo
resolution,
15.4 lines/mm (392 lines/inch)-in super fine
resolution
Copy resolution:
Up to 600 × 600 dpi
Scanning resolution:
Up to 600 × 1,200 dpi (Optical)
Up to 9,600 × 9,600 dpi (Interpolated)
■ Photo resolution:
64-level
■ Scanner type:
Charge Coupled Device (CCD)
■ Printer type:
Laser Printer
■ Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
■ Modem speed:
33,600 / 31,200 / 28,800 / 26,400 / 24,000 /
21,600 / 19,200 / 16,800 / 14,400 / 12,000 /
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic
Fallback
■ Operating environment:
10 °C – 32.5 °C (50 °F – 90.5 °F), 20 % – 80 %
RH (Relative Humidity)
■ Dimensions:
Approx. height 312 mm × width 773 mm × depth
444 mm (12
5
/
16
" × 30
7
/
16
" × 17
1
/
2
")
■ Mass (Weight):
Approx. 18 kg (39.7 lb.)
■ Power consumption:
Standby: Approx. 9.5 W
Transmission: Approx. 28 W
Reception: Approx. 400 W
Copy: Approx. 430 W
Maximum: Approx. 900 W (When the fuser lamp
turns on)
■ Power supply:
120 V AC, 60 Hz
■ Fax memory capacity:
10 MB in total
Approx. 630 pages of memory reception with
back-up
(Max. 255 pages per one reception)
Approx. 150 pages of memory transmission
(Based on the ITU-T No. 1 Test Chart in standard
resolution.)
■ Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
■ Print speed:
Approx. 18 ppm (pages per minute)
■ Printing resolution:
600 × 600 dpi
*1 Transmission speed depends upon the
contents of the pages, resolution, telephone
line conditions and capability of the other
party’s machine.
*2 Transmission speed is based upon the ITU-T
No. 1 Test Chart. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
ITU-T No.1 Test Chart
Note:
L Design and specifications are subject to
change without notice.
L The pictures and illustrations in these
instructions may vary slightly from the actual
product.
FLB851-PFQX2175YA-en.book Page 92 Thursday, September 8, 2005 2:24 PM