35
Sending Faxes
Sending the same document to pre-programmed parties
1
Insert the document FACE DOWN.
●
If necessary, press or repeatedly
to select the desired resolution (p. 28).
2
Press .
Display:
3
Press or until the following is
displayed.
4
Press .
●The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report
(see below).
Note:
●
If you select the “FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
transmit will decrease.
●
If the document exceeds the memory capacity (p. 73),
sending will be canceled.
●
If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all of the other stations
have been called.
To cancel the broadcast setting
1. Press while the unit displays the
following message.
Display:
●
The display will show the following.
2. Press .
To Next Page
Loading...
