Panasonic KX-FP151

Features Summary
54
Code Display & Feature Settings How the unit operates
#44
To alert you with beeps when a
received document is stored into
memory due to a problem.
RECEIVE ALERT
MODE=ON [±]
If you hear slow beeps, clear the
printing problem or supply paper to
print the stored document. The
beeps will stop.
#46
To receive a fax automatically when
you answer a call and hear a fax
calling tone (slow beep).
FRIENDLY RCV
MODE=ON [±]
ON
OFF
“ON”: You do not have to press
for fax reception.
FAX/START
#41
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 44).
FAX ACTIVATION
MODE=ON [±]
ON /
CODE= 9
OFF
1. Follow steps 1 and 2 above.
2. Press or to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
●
Do not enter “0000”.
MENU
SET
SET
(The default setting is in bold type.)
ON
OFF
#49
To answer a call with an extension
telephone in TEL/FAX mode
(p. 41).
AUTO DISCONNECT
MODE=ON [±]
ON /
CODE= 0
OFF
1. Follow steps 1 and 2 above.
2. Press or to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
MENU
SET
SET
How to set menu options
Note:
●
Step 3 may be slightly different
depending on the feature.
●
See page 49 for more details.
Advanced features (cont.)!
Programming table (cont.)
1. Press .
2. Press or until the following is
displayed.
Press and press or until
the desired feature is displayed.
SET
ADVANCED MODE
PRESS SET
MENU
3. Press or until the
desired setting is displayed.
4. Press .
5. Press .
MENU
SET