Features Summary
49
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 50–55).
1
Press .
Display:
2
Select the feature you wish to program.
■For basic features (p. 50, 51):
Press or until the desired
feature is displayed.
■For advanced features (p. 52–55):
Press or until the following is
displayed.
Press and press or until
the desired feature is displayed.
●
The current setting of the feature will be
displayed.
3
Press or until the desired setting
is displayed.
●
This step may be slightly different
depending on the feature.
4
Press .
●
The setting you selected is set.
5
To exit programming, press .
General programming method
Another programming method
You can select a feature by directly entering the program
code (# and 2-digit number) instead of using or
in step 2.
1.Press
.
2.Press and the 2-digit code number.
3.Follow steps 3 to 5 above.
●
See programming tables for code numbers (p. 50–55).
To cancel programming
Press to exit the program.
To Next Page
Loading...
