8. Help
49
8.3.8 If a power failure occurs
L The unit will not function.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L If delayed transmission (feature #25 on page 37) is programmed and a power failure prevents the document from
being sent at the set time, the document will be sent after power is restored.
L If any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will
be printed stating which documents in memory have been erased.
The other party complains
that they cannot leave a voice
message.
L The recording time is set to “GREETING ONLY”. Select “1 MINUTE”, “2
MINUTES” or “3 MINUTES” (feature #10 on page 35).
L The memory is full. Erase unnecessary messages (page 32).
L Make sure there is no other answering machine connected on the same
line.
Caller ID information does not
display during message
playback.
L The caller information will not be displayed if a message is recorded by
using {MEMO} (page 32).
Problem Cause & Solution
FP207-218FX-PFQX2515ZA-en.book Page 49 Friday, June 30, 2006 11:58 AM
To Next Page
Loading...
