Panasonic KX-FPC95

101
Ink Film
For fax advantage assistance, call 1-800-435-7329.
4
Remove the stoppers and tags from the new
ink film. Find the “T” shaped gear (blue).
Tags
New ink film
“T” shaped gear (blue)
Stopper
Stopper
5
Insert the blue core of the front ink film roll
into the right slot of the unit ( ). Insert the
“T” shaped gear (blue) into the left slot of the
unit ( ).
Insert the back ink film roll ( ).
3
2
1
1
3
2
Right
slot
Blue core
“T” shaped
gear (blue)
Left
slot
Back ink film roll
Front ink
film roll
6
If the ink film is slack, tighten it by winding
the gear.
2
Gear
Ink film
Note:
●
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
Incorrect Correct
Tight
7
Close the back cover securely by pushing
down on the dotted area at both ends ( ).
Close the front cover securely ( ).
●
The following message will be displayed
while the unit is checking that there is no
slack on the ink film.
Display:
PLEASE WAIT
2
1
Dotted area
Front cover
Display
Back cover
1
2