4.3.2. THERMAL HEAD
If smudges or black/white lines appear on a copied/received
document, check whether there is dust on the thermal head
and head cover. Clean them to remove the dust.
1 Disconnect the power cord and the telephone line cord.
2 Open the cover by pressing the cover open button ( ) and
remove the recording paper.
3 Clean the thermal head ( ) and head cover ( ) with a cloth
moistened with isopropyl rubbing alcohol, and let all parts dry
thoroughly.
Caution:
To prevent a malfunction due to static electricity, do not
use a dry cloth and do not touch the thermal head
directly.
4 Connect the power cord and the telephone line cord.
5 Install the recording paper and close the cover securely by
pushing down on both sides.
22
KX-FT901CX-B / KX-FT903CX-B / KX-FT901CX-W / KX-FT903CX-W / KX-FT901CX-S / KX-FT903CX-S
To Next Page
Loading...
