When set to ON (=1), the 12 keys and transmission
frequencies are as shown.
key High Frequency (Hz) key Low Frequency (Hz)
“1” 697 “5” 1209
“2” 770 “6” 1336
“3” 852 “7” 1477
“4” 941 “8” 1633
When set to OFF (=2), the 12 keys and transmission
frequencies are as shown.
High (Hz) 1209 1336 1477
Low (Hz)
697 “1” “2” “3”
770 “4” “5” “6”
852 “7” “8” “9”
941 “ ” “0” “#”
7.4.1. DTMF SINGLE TONE TRANSMIT SELECTION
Note:
After performing this check, do not forget to turn the setting off.
Otherwise, dialing in DTMF signal will not work.
7.4.2. BUTTON CODE TABLE
Code Button Name Code Button Name Code Button Name
03 AUTO ANSWER 32 2 01 STOP
04 FAX/START 33 3 5A STATION 1
05 MENU 34 4 5B STATION 2
07 HELP 35 5 5C STATION 3
08 MONITOR 36 6 5D STATION 4
09 COPY 37 7 5E STATION 5
0A MUTE 38 8 5F STATION 6
0B PREV 39 9 60 STATION 7
0C NEXT 3A 0 61 STATION 8
0D VOLUME 3B 62 STATION 9
0E VOLUME 3C # 63 STATION 10
1C SEARCH 3D REDIAL/PAUSE 64 STATION 11
1D LOWER 3E FLASH
31 1 00 NO INPUT
Note:
These codes (00, 01) are only for the data in the History Report.
7.4.3. PRINT TEST PATTERN
46
KX-FT901CX-B / KX-FT903CX-B / KX-FT901CX-W / KX-FT903CX-W / KX-FT901CX-S / KX-FT903CX-S
To Next Page
Loading...
