During a Conversation
Transferring a Call (Call Transfer)
Y
ou can transfer a call to another destination (extension or outside party).
To transfer
1
. Press [TRANSFER] during a conversation.
2. Dial the party you want to transfer to. a
3. Wait until the other party answers to announce the transfer.
4
. Go on-hook.
Note
R To return to the call before the transfer destination answers, press [CANCEL].
To do a blind transfer
1
. Press
*1
during a conversation.
2. Dial the party you want to transfer to. a
*1 If blind transfers are not permitted, this soft key is not displayed. Contact your administrator for
f
urther information.
Holding a Call
Y
ou can put a call on hold by holding the call at your extension.
Holding
T
o hold the current call
1. [HOLD]
To retrieve a call on hold at your line
1. [HOLD]
*1
*1 When the handset is already off-hook, press and release the hook switch.
Note
R When a call is received while another call is on hold, pressing and releasing the hook switch will
answer the call.
Holding in a System Parking Zone (Call Park)
Y
ou can use this feature as a transferring feature.
When Call Park is permitted, the
soft key is displayed. However, the Call Park feature number
m
ust be set beforehand. Also, depending on your phone system, you may need to enter a parking zone
number to retrieve a parked call. The feature depends on your phone system. Contact your administrator
for further information.
To set
1.
To retrieve (Call Park Retrieve)
[
In standby mode]
1. Enter the Call Park Retrieve feature number.
22
During a Conversation
To Next Page
Loading...
