Panasonic KX-HNB700 - I Want to View Color Images at Night; I Want to Know When My Baby Wakes up; I Want to Know When a Room Gets too Hot or Cold

Required procedures
R Use the [HomeHawk] app to configure a mode or use a preset mode. See “Mode settings
(overview)”, Page 91.
I want to view color images at night
You can configure cameras to display images in color even at night or when the area surrounding the
cameras is dark.
Supported devices
R Floor camera (KX-HNC850)
R Front door camera (KX-HNC700, KX-HNC705)
R Outdoor camera (KX-HNC710, KX-HNC715)
Required procedures
R Use the [HomeHawk] app to set [Night Vision] to [Color].
– Floor cameras: See “Using night vision”, Page 72.
– Front door cameras and outdoor cameras: See “Using night vision”, Page 96.
I want to know when my baby wakes up
You can configure cameras to notify your mobile device when sound (such as a crying baby) is detected.
Supported devices
R Shelf camera (KX-HNC810)
R Floor camera (KX-HNC850)
R HD Camera (KX-HNC800, KX-HNC805, KX-HN1003)
Required procedures
R Use the [HomeHawk] app to configure the camera’s sound alert feature.
– Floor cameras: See “Notification settings”, Page 77.
– Shelf cameras: See “Notification settings”, Page 77.
– HD Camera: See “[Notification Settings]”, Page 129.
I want to know when a room gets too hot or cold
You can configure cameras to notify your mobile device when the temperature of a room goes above or
below the specified temperatures.
Supported devices
R Shelf camera (KX-HNC810)
R Floor camera (KX-HNC850)
R HD Camera (KX-HNC800, KX-HNC805, KX-HN1003)
Required procedures
R Use the [HomeHawk] app to configure the camera’s sound alert feature.
– Floor cameras: See “Notification settings”, Page 77.
– Shelf cameras: See “Notification settings”, Page 77.
– HD Camera: See “[Notification Settings]”, Page 129.
15
Getting started with the HomeHawk!