Registering devices
If you purchased devices that are not registered, you must register them before you can use them.
Note:
R To register a mobile device, use the procedure described in the following.
– Floor cameras: “Registering other mobile devices to the floor camera”, Page 54
– Shelf cameras: “Registering other mobile devices to the shelf camera”, Page 42
– Front door cameras/outdoor cameras: “Registering your mobile device to additional access points”,
Page 100
– HD cameras: “Registering other mobile devices to the HD camera”, Page 133
Registering shelf cameras
1 From the [HomeHawk] app home screen, tap ® [Add Camera(s)].
2 Tap [SHELF Camera].
3 Perform the procedure described in “Initial setup”, Page 40, starting from step 3.
Registering floor cameras
1 From the [HomeHawk] app home screen, tap ® [Add Camera(s)].
2 Tap [FLOOR Camera].
3 Perform the procedure described in “Initial setup”, Page 52, starting from step 3.
Registering access points
1 From the [HomeHawk] app home screen, tap ® [Add Camera(s)].
2 Perform the procedure described in “Initial setup”, Page 81, starting from step 3.
Registering front door cameras and outdoor cameras
1 From the [HomeHawk] app home screen, tap ® [Add Camera(s)].
2 Tap [OUTDOOR Camera] or [FRONT DOOR Camera].
3 If you are close to the access point and can press its SETUP button:
Press and hold the access point’s SETUP button until the access point’s LED indicator blinks slowly
in green, and then tap [Click here to continue].
If you are not close to the access point and cannot press its SETUP button:
Tap [Click here if you are not close to the Access Point].
R If there are multiple access points, select the access point that you want to register the device to.
4 When prompted, press and hold the SETUP button on the camera that you want to register until the
camera’s LED indicator blinks slowly in green.
R When registration is complete, the camera sounds one long beep.
R If registration fails, the camera sounds several short beeps.
Note:
R You can customize the name of each device for easier management. For details, see “Changing the
name of cameras”, Page 99.
Registering HD cameras
1 From the [HomeHawk] app home screen, tap ® [Add Camera(s)].
2 Tap [Indoor HD Camera].
29
Getting started with the HomeHawk!
To Next Page
Loading...
