Panasonic KX-HNB700 - Erasing Recordings; Protecting Recordings

Erasing recordings
Erasing individual images
1 From the [HomeHawk] app home screen, tap ® [Recording List].
2 Select the desired access point and camera.
R Select [All Cameras] to see recorded images from all the cameras registered to the specified
access point.
3 Tap or to select a recording date.
4 Select the desired recording.
5 Tap
® [OK].
Erasing multiple images
1 From the [HomeHawk] app home screen, tap ® [Recording List].
2 Select the desired access point and camera.
R Select [All Cameras] to see recorded images from all the cameras registered to the specified
access point.
3 Tap or to select a recording date.
4 Tap [Edit] ® [Delete].
5 Select the desired recordings.
R
Tap
to select or deselect all images shown in the list.
6 When finished, tap [Delete] ® [OK].
Protecting recordings
You can protect recordings so that they cannot be erased.
Protecting individual images
1 From the [HomeHawk] app home screen, tap
® [Recording List].
2 Select the desired access point and camera.
R Select [All Cameras] to see recorded images from all the cameras registered to the specified
access point.
3 Tap or to select a recording date.
4 Select the desired recording.
5 Slide to .
R is displayed in images to indicate that the image is protected.
R Slide to to remove the protection.
Protecting multiple images
1 From the [HomeHawk] app home screen, tap ® [Recording List].
90
Using a front door camera and outdoor camera