To change the paper size and paper type
To use other paper sizes/types, see the following table and change the appropriate settings.
Tray type Paper sizes Paper types
Standard input tray feature #380 feature #383
Manual tray (y) feature #381 feature #384
R For number of sheets the unit can load, see page 128.
Tray number information
The unit shows the tray number as follows instead of displaying the name of tray.
– “#1”: Standard input tray
– “#2”: Manual tray (y)
3.2.1 Standard input tray
R If you load more than the specified amount of paper, a paper jam may occur and the paper may be damaged.
R Depending on the type of paper, the loaded paper may exceed the upper limit mark (
). In this case, remove some
paper from the tray.
1 Pull the standard input tray (A) until it clicks into place, and then lift the front part of the tray and pull it completely
out.
2 Before loading a stack of paper, fan the paper to prevent paper jams.
26
3. Basic Operations
To Next Page
Loading...
