2 Select the desired category from the menu bar.
[Device]: features of the unit
[Network]: network features
[Directory]: registration of the address book, etc
3 Type “root” as the user name, then enter the programming password (feature #155). A [OK]
4 Select the desired feature from the menu.
5 Change the settings or edit the information.
R This step will vary depending on the feature.
6 [Submit]
R The new setting will be transferred to the unit.
7 Close the web browser.
Note:
R The settings displayed in the web browser can be updated by clicking [Reload].
42
3. Basic Operations
To Next Page
Loading...
