Panasonic KX-NTV150 - Digital Input and Output (DI;DO) Configuration

2.14.2 DI and DO
Connect DI or DO devices to the terminal block of the KX-NTV150/KX-NTV160, the KX-NTV150/
KX-NTV160 will automatically detect the current connection state as pulled-high or pulled-low. You may then
define the triggering condition.
Digital input: Select High or Low to define the "Normal status" for the digital input. The KX-NTV150/
KX-NTV160 will report the current status.
Digital output: Select Grounded or Open to define the "Normal status" for the digital output. The
KX-NTV150/KX-NTV160 will show whether the trigger is activated or not.
Make time: Set the keeping triggered time after digital output is triggered. For example, if set make time as 5
seconds, when Door Opener (Digital output) is opened, it will keep Open status for 5 seconds.
User’s Manual 119
2 Software