3. The imported, manufactured Radio-frequency Telecommunications terminal equipment violate this
regulations due to unapproved use or radio frequency, electrical power modified.
The company, enterprise, or users is not only punished as per regulations of "Telecommunications Act",
but also revoked of approved certificate.
For Users in Argentina
CONDITION OF OPERATION
The operation of this equipment is conditioned to that they do not produce detrimental interference on other
radio electric systems authorized. In addition of that, there is not going to be place to complaints because of
interferences caused by stations authorized on this systems.
PRIVACY OF THE COMMUNICATIONS
With the use of this system, the privacy of the communications, is not this guaranteed against clandestine
listening.
The digital technology of expanded spectrum reduces the possibility of illegal listening to protect its privacy.
For Best Performance
Noise
Occasional noise or interference may occur due to electromagnetic radiation from objects such as refrigerators,
microwave ovens, faxes, TVs, radios, or personal computers. If noise disturbs your calls, keep the product
away from these electrical appliances.
Environment
• Keep the product away from heating appliances and devices that generate electrical noise, such as
fluorescent lamps and motors. These noise sources can interfere with performance of the product.
• Do not pace the product in places where the temperatures out of the range of product spec.
KX-NTV150: 0 °C to 40 °C
KX-NTV160: -10 °C to 50 °C
• Allow 10 cm (3 15/16 inches) clearance around the product for proper ventilation.
• Avoid environments with excessive smoke, dust, moisture, mechanical vibration, shock, or direct sunlight.
• The apparatus is designed to be installed and operated under controlled conditions of ambient temperature
and a relative humidity.
Routine Care
• Unplug the AC adaptor from the AC outlet and disconnect the Ethernet cable before cleaning.
• Wipe the product with a soft cloth.
• Do not clean the product with abrasive powder or with chemical agents such as benzine or thinner.
• Do not use liquid cleaners or aerosol cleaners.
• Clean the terminal of the charger periodically.
Placement
• Do not place heavy objects on top of the product.
• Do not place the product around heat sources, such as a television or oven.
• Keep the product away from direct sunlight.
• Do not place the product on unsteady surfaces.
User’s Manual 7
Important Information
To Next Page
Loading...
