2. In the IP address text box, enter the IP address of the remote server.
3. In the port text box, enter the port number of the remote server.
4. When completed, click Save to enable the setting.
You can configure the KX-NTV150/KX-NTV160 to send the system log file to a remote server as a log backup.
Before utilizing this feature, it is suggested that the user install a log-recording tool to receive system log
messages from the KX-NTV150/KX-NTV160. An example is Kiwi Syslog Daemon. Visit http://
www.kiwisyslog.com/kiwi-syslog-daemon-overview/.
User’s Manual 53
2 Software
To Next Page
Loading...
