Basic mode: User can simply enter one outgoing number.
Advanced mode:
With the setting, make SIP outgoing according to time setting (Day/Lunch/Break/Day2/Night).
By Time mode, users can divide one day into Day/Lunch/Break/Day2/Night time periods.
Set the time period with the following rules:
• Day/Lunch/Day2/Night only need to set START time.
• The next START point of time period is the previous END point of time period.
• If the time period or number setting are blank, skip the time period then start the next time period.
Example:
If you set
Day1: start from 9:00
Lunch: start from 12:00
Break: Start from 14:00 to 16:00
62 User’s Manual
2 Software
To Next Page
Loading...
