4. The Certificate information will automatically be displayed as shown below. You can click Certificate
properties to view detailed information about the certificate.
5. Click Save to preserve your configuration and your current session with the KX-NTV150/KX-NTV160 will
change to the encrypted connection.
6. If your web session does not automatically change to an encrypted HTTPS session, click Home to return
to the main page. Change the URL address from "http://" to "https://" in the address bar and press Enter
on your keyboard. Some security dialogs may be displayed. Follow the displayed instructions to enable
HTTPS.
Request and install certificates
1. Select the option from the Method pull-down menu.
User’s Manual 95
2 Software
To Next Page
Loading...
