This Manual: http://www.manuallib.com/file/2525964
KX-P1124 Features
Alternate Graphic Mode (AGM)
There are two kinds of graphic printing in IBM Proprinter X24 mode.
You can set them through Alternate Graphic Mode setting in the Initial
Setup mode or through software.
When AGM is set to OFF, a-pin bit image graphic is printed by using
pins
1 through 20.
When Aiternate Graphic Mode is set to
ON,
ihe
printing
of
B-pin Graphic
mode is the same as in Epson LQ-2500 mode. Also, graphic printing
command,
ESC+*
in Epson LQ-2500 mode is effective in this mode.
Therefore, you can use the same command as
in
Epson LQ-2500
mode.
The following table shows commands affected by AGM mode.
ESC+K+n,+n,
ESC+L+n,+n,
ESC+Y+n,+n,
ESC+Z+n,+n,
8-Pin
ESC+[+g mode
ESC+3+n
ESC+A+n
ESC+J+n
24-Pin
mode
use 24 pin
use
24
pin
based
on
n/180 inch
based
on
n/
60
inch
based
on
nl180 inch
5-20
use 20 pin
use 20
pin
use 24
pin
based
on
nl216 inch
based
on
nl72 inch
based.
on
nl216 inch
To Next Page
