EasyManua.ls Logo

Panasonic KX-T0141 - User Manual

Panasonic KX-T0141
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model No.
KX-T0141
KX-TDA0142
KX-T0151
KX-TDA0152
2.4 GHz Cell Station Unit
Quick Installation Guide
Document Version: 2009-12
Thank you for purchasing a Panasonic 2.4 GHz Cell Station Unit.
Please read this manual carefully before using this product and save this manual for future use.
www.voicesonic.com
Phone: 877.289.2829

Questions and Answers

  • R
    Renee HoAug 9, 2025
    What to do if my Panasonic Telephone Accessories PS becomes out of range?
    • L
      Leslie PerezAug 9, 2025
      If your Panasonic Telephone Accessories PS is out of range, it could be due to the location of the CS. Relocate the CS to a better location. Alternatively, the access system of the PS may not be properly set. In that case, change the access system setting of the PS to the appropriate system or set it to automatic.
  • A
    aaron58Aug 14, 2025
    Why is there noise when using Panasonic Telephone Accessories PS?
    • M
      Michelle GallegosAug 14, 2025
      Frequent noise, disconnections, or a 'NO SERVICE' message on your Panasonic Telephone Accessories PS could be due to call handover issues or the PS being out of the CS coverage area. Relocate the CS to a better location to resolve these problems.
  • T
    Travis StevensonAug 19, 2025
    How to fix Panasonic Telephone Accessories when the LED of the CS does not change to Green ON?
    • K
      Kyle WoodSep 12, 2025
      If the LED of the CS on your Panasonic Telephone Accessories does not turn green, it could be due to several reasons. First, ensure the optional service card is properly installed. Second, check that the cable is correctly connected with the right pin assignments and that there are no short circuits. Third, make sure the CS is set for normal operation by switching all DIP switches off. Finally, verify that the port the CS is connected to is set to 'In Service' using the Maintenance Console.
  • A
    Ana HesterAug 25, 2025
    What to do if I cannot register the PS on my Panasonic KX-T0141?
    • M
      Madison FloresAug 26, 2025
      If you are unable to register the PS on your Panasonic Telephone Accessories, the Personal Identification Number (PIN) registered to the PS may be incorrect. Enter the PIN that is set in the PBX into the PS.
  • G
    Guy HaynesAug 29, 2025
    What does it mean if the LED of the CS stays Red ON during normal operation of Panasonic KX-T0141 Telephone Accessories?
    • G
      Gerald NguyenAug 29, 2025
      If the LED of the CS stays red during normal operation of your Panasonic Telephone Accessories, it indicates a CS malfunction. Replace the CS.
  • M
    Mr. Derek Brown Jr.Sep 4, 2025
    What to do if Panasonic KX-T0141 PS stays out of service after changing the CS status?
    • K
      Katelyn FlynnSep 4, 2025
      If the Panasonic Telephone Accessories PS remains out of service after changing the CS status to 'In Service', allow approximately 20 seconds for the CS to start up.

Panasonic KX-T0141 Specifications

General IconGeneral
BrandPanasonic
ModelKX-T0141
CategoryTelephone Accessories
LanguageEnglish

Related product manuals