Panasonic KX-T7020E - Pulse to Tone Conversion; Station Feature Clear; Redial, Last Number; Redial, Saved Number

Issue 216
Proprietary Telephone Features
Pulse to Tone Conversion
Allows you to change from Pulse to Tone dialling mode.
Dial phone number (Pulse mode).
Dial * + # .
Dial phone number (Tone mode).
Redial
Without lifting the handset, redialling can be activated
Pick up the handset or press SP-PHONE with SP-PHONE
button.
Press REDIAL button.
- Last Number
Automatically saves the last outside call number you dialled
and allows you to make the same outgoing call again.
Pick up the handset or press SP-PHONE.
Press REDIAL button.
- Saved Number
The desired outside call number can be stored and then re-
dialled.
Assign a Exchange line button as the SAVE button. See
Station Programming.
Storing
While having a conversation or when hearing busy tone;
Press AUTO DIAL/STORE button.
Press SAVE (Exchange line) button.
Replace the handset or press SP-PHONE.
Dialling
Pick up the handset or press SP-PHONE.
Press SAVE (Exchange line) button.
Station Feature Clear
Allows you to reset all station features you programmed, to
the default settings.
Pick up the handset or press SP-PHONE.
Dial 790 .
- Confirmation tone is audible.
Replace the handset or press SP-PHONE.
Station Speed Dialling
Each extension can store up to 10 speed dial numbers which
are only available to that extension user.
Storing phone numbers
Pick up the handset or press SP-PHONE.
Dial 60 .
Dial the Station Speed Dial number (0-9).
Dial the desired number *1 + # .
(*1 The line access code is required for
an outside call.)
- Confirmation tone is audible.
Replace the handset or press SP-PHONE.
Dialling
Pick up the handset or press SP-PHONE.
Dial 6 * + Station Speed Dial number (0-9).
System Speed Dialling
The system supports 500 speed dial numbers which are
available to all extension users.
Pick up the handset or press SP-PHONE.
Press AUTO DIAL/STORE button.
Dial the System Speed Dial number (000-499).
Timed Reminder
Each extension can be set to generate an alarm ringing at a
pre-set time as a wake up or reminder. You can set to be
activated once or every day at the pre-set time.
Setting
Pick up the handset or press SP-PHONE.
Dial 761 .
Enter hour (01-12).
Enter minute (00-59).
Dial 0 or 1 .
-0 : for AM
-1 : for PM
Dial 0 or 1 .
-0 : for a one time alarm setting
-1 : for a daily alarm setting
Replace the handset or press SP-PHONE.
Cancelling
Pick up the handset or press SP-PHONE.
Dial 760 .
- Confirmation tone is audible.
Replace the handset or press SP-PHONE.