Panasonic KX-T7630 - How to Find Extension Number (Display Handset Required); How to Find Group Number (Display Handset Required); How to Change Intercom Voice Auto Answer; Ring; Caller Control

10.5. POWER SUPPLY CIRCUIT
This circuit converts the voltage supplied from PBX into the power supply voltage of +3.3V by
IC6(Switching Regulator IC).
IC10 controls the power supply circuit as below to turn IC6 on in low consumption current at
starting up.
- Input Voltage approx. 30V or less IC10-pin 1 L IC6 OFF
- Input Voltage approx. 30V or more IC10-pin 1 HiZ IC6ON
17