6
Before Operating the Telephones
Connection
Tilt Angle Adjustment
The tilt angle of the operation board can be adjusted.
To lift : Lift up the operation board.
To set down : Lift up the operation board until the hook knobs click ( ), then press down
().
• Consult your dealer for more details about DXDP and XDP.
Connect to a Digital Hybrid IP PBX ( )
The telephone line cord (included)
< Back view>
Connect to a digital proprietary telephone
for DXDP, or a single line telephone for XDP,
or a standard telephone jack ( ).
PABX
TO MAIN UNIT
CAUTION
Ensure the cord is inserted in the groove
to prevent damage to the connector.
TO TEL
1
2
1
2
To Next Page
Loading...
