Quick Reference Guide
Model No. KX-T7710
Attention
When using the KX-T7710, keep the following conditions in mind.
If there is any problem, unplug the extension line and connect a known working phone.
If the known working phone operates properly, have the defective phone repaired by a
specified Panasonic Factory Service Centre. If the known working phone does not
operate properly, check the Panasonic KX series Business Telephone System and the
internal extension wiring.
Keep the unit away from heating appliances and electrical noise generating devices such
as fluorescent lamps and motors.
The unit should be kept free of dust, moisture and vibration, and should not be exposed
to direct sunlight.
Do not use benzine, thinner, or any abrasive powder to clean the cabinet. Wipe it with a
soft cloth.
Do not disassemble this product. Dangerous electrical shock could result. The unit
must only be disassembled and repaired by qualified service technicians.
Do not use any handset other than a Panasonic handset.
Never attempt to insert wires, pins, etc, into the vents or other holes of this unit.
When a failure occurs which exposes any internal parts, disconnect the telephone line cord
immediately and return the unit to a service centre.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
THIS HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS
OBJECTS.
Note:
In this manual, the suffix of each model number is omitted.
This Class B digital apparatus complies with Canadian ICES-003.
This product is intended to be connected to Panasonic KX series Business Telephone System.
To Next Page
Need help?
General