- To exit the operation, press any time.
- *1 You can select one of 10 languages. If you set a language you
cannot read, reset the handset to its initial settings.
Press MENU DOWN RIGHT UP RIGHT 4-digit
Handset PIN UP OK
All handset setting will be reset to their initial settings, however,
the Phonebook data will be saved.
6.12. Selecting Dialling Mode (Tone/Pulse)
You can change the dialling mode to tone or pulse depending upon your network service. If you
have a touch tone service, select tone. If you have rotary or pulse service, select pulse.
- To exit the operation, press any time.
- *1: The factory preset is 0000.
6.13. Selecting Flash/Earth Mode
An earth relay can be installed as an option depending on your PBX requirements.
Please consult your nearest Panasonic Service Centre for installation. On installation, you can
select flash or earth mode to suit your PBX or Network provider.
17
www.freeservicemanuals.info
Digitized in Heiloo, Holland
To Next Page
Loading...
