Panasonic KX-TCD420BXM - Page 75

Address Default Name
Country
Setting
Type Description
0F6A 00 TamRingsDefNum x D Number of rings default data
0: Default is Automatically
Turn
on
for
Toll saver
2-7: Default of the number of
rings
for
Turn on.
27.3.6. BsUiTask settings
Address Default Name
Country
Setting
Type Description
0F6E 01 Config1 03 D BsUiTask configuration (MSB)
Bits 1=enable 0=disable
0: AmPmClockSettingEnabled,
enabled
1:
ClipDetectionSettingEnabled,
disabled
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled,
disabled
5:
SmscSendNumberSettingEnabled,
disabled
6-7: Unused
0F6F F7 Config2 07 D BsUiTask configuration (LSB)
Bits 1=enable 0=disable
0: FlashTime1Enabled, enabled
1: FlashTime2Enabled, enabled
2: FlashTime3Enabled, enabled
3: KeyClicksEnable, enabled
4: ARSCarrierMenuEnabled,
enabled
5:
ARSIntDeletionMenuEnabled,
enabled
6:
ARSMultipleCarrierMenuEnabled,
enabled
7:
ARSMultipleAreaCodeMenuEnabled,
enabled
28. EEPROM LAYOUT (HANDSET)
28.1. Scope
The purpose of this section is to describe “layout of the EEPROM (IC2) KX-A142 Handset”.
The EEPROM contains hardware, software, and user specific parameters. Some parameters are
set during production of the handset e.g. crystal oscillator adjustment at 0000..01, some are set
by the user when configuring the handset e.g. ringer volume at 0F38, and some during normal
use of the phone e.g. redial memory at 0311..0392.
75
www.freeservicemanuals.info
1/2/2015
Digitized in Heiloo, Holland