this period, the assembly will no longer be available.
2. Important safety notice
Components identified by the mark indicates special
characteristics important for safety. When replacing any of these
components, only use specified manufacture’s parts.
3. The S mark means the part is one of some identical parts. For that
reason, it may be different from the installed part.
4. ISO code (Example: ABS-94HB) of the remarks column shows
quality of the material and a flame resisting grade about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms ( ) K=1000 , M=1000k
All capacitors are in MICRO FARADS ( F)P= F
*Type & Wattage of Resistor
35.1. Base Unit
35.1.1. Cabinet and Electrical Parts
88
www.freeservicemanuals.info
Digitized in Heiloo, Holland
To Next Page
Loading...
