Getting Started
14
Note:
L The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {j/OK}
2 {r}: “Setup” s {j/OK}
3 {r}: “Dial Mode” s {j/OK}
4 {r}: Select the desired setting.
5 {j/OK} s {ic}
TG161x_171xFX(e).book Page 14 Monday, February 28, 2011 9:11 AM
To Next Page
Loading...
