Useful Information
For assistance, please call: 1-800-211-PANA(7262)
51
Wall Mounting
This unit can be mounted on a wall phone plate.
1
Push the hook and turn it
around. Turn the hook until a
click is heard.
2
Press the tabs in the direction
of the arrows ( ), then remove
the wall mounting adaptor ( ).
3
Connect the AC adaptor. Tuck
the telephone line cord inside
the wall mounting adaptor, then
push the adaptor in the direction
of the arrows ( and ).
• The word “UP WALL” should face
upward.
4
Connect the telephone line cord.
Mount the unit, then slide down.
• Raise the antenna.
• Fasten the telephone line cord to
prevent it from being disconnected.
5
To charge the handset battery:
Fix the charge contacts ( )
and fit the handset hole into the
hook ( ).
• The IN USE/CHARGE indicator
lights and the unit beeps once.
1
2
2
11
1 2
2
1
To Power
Outlet
Hook
Hooks
1
2
2
1
Hook
Hole
OR
To Next Page
Loading...
