For assistance, please call: 1-800-211-PANA(7262)
45
Direct Commands
Useful Information
During programming:
When “Save” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
*
1
Can be used to activate Caller IQ. See the leaflet included with this unit for more
information.
*
2
For openLCR subscribers only.
*
3
For openLCR subscribers only. If information is not downloaded to your unit, “Get
new Info.?” will be displayed. To download information, see page 52.
*
4
After pressing [7], make sure “View Info.?” is displayed, then press the next
command.
If Caller IQ is turned off, “Turn CIQ on?” is displayed after pressing [7].
Change language [0] [8] [1] : English [2] : Spanish p. 13
Message alert [0] [#][1] : On [0] : Off p. 17
Menu item Command Selection items Page
PQQX13982YA.book Page 45 Friday, January 23, 2004 10:02 AM
To Next Page
Loading...
