44
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing ([0]
to [9], and [#]) instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume [1] [1] [0] : Off
[1] : Low
[2] : Medium
[3] : High
p. 15
Ringer tone [1] [2] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4
p. 16
V.M. access [3] p. 36
Voice enhancer [5] [1] : On [0] : Off p. 20
Activate Caller IQ *
1
[7] [1] —
View information *
3
[7] [2] *
4
Go to Step 4 on page 53. —
Get new information *
2
[7] [3] *
4
Go to Step 4 on page 52. —
Turn Caller IQ off *
2
[7] [4] *
4
p. 50
Turn Caller IQ on *
2
[7] [5] *
4
p. 50
LCD contrast [0] [1] [1]–[6] : Level 1–6 p. 17
Key tone [0] [2] [1] : On [0] : Off p. 40
Auto talk [0] [3] [1] : On [0] : Off p. 14
Caller ID number auto
edit
[0] [4] [1] : On [0] : Off p. 26
Set dial mode [0] [5] [1] [1] : Pulse [2] : Tone p. 13
Set flash time [0] [5] [2] [1] : 700 ms [2] : 600 ms
[3] : 400 ms [4] : 300 ms
[5] : 250 ms [6] : 110 ms
[7] : 100 ms [8] : 90 ms
p. 39
Set line mode [0] [5] [3] [1] : A [2] : B p. 14
Store VM access# [0] [7] [1] Go to Step 5 on page 34. —
VM tone detect [0] [7] [2] [1] : On [0] : Off p. 35
PQQX13982YA.book Page 44 Friday, January 23, 2004 10:02 AM
To Next Page
Loading...
