Preparation
For assistance, please call: 1-800-211-PANA(7262)
17
Programmable Settings
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is “level 3”.
Message Alert
You can select whether or not the Ringer/Message Alert indicator on the handset
will flash slowly when new messages in your voice mailbox have been recorded
(p. 36). The factory preset is OFF.
• The Ringer/Message Alert indicator will not flash for new messages while the
handset is in use.
• The Ringer/Message Alert indicator acts both as a ringer indicator and as a
message alert indicator. This indicator will flash rapidly when a call is received
whether this feature is on or off.
• Battery operating time may be shortened when using this feature (p. 10).
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “LCD contrast” by pressing [
d
] or
[
B
], then press Select.
4 Select the desired contrast by pressing [
d
] or
[
B
].
• The contrast will change.
5 Press Save, then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Message alert” by pressing [
d
] or
[
B
], then press Select.
4 Select “On” or “Off” by pressing [
d
] or [
B
].
5 Press Save, then press [OFF].
Handset
Initial setting
Back Select
K
d
BL
LCD contrast
Back Select
K
d
BL
Ex. Level 3
LCD contrast
Low High
Back Save
K
d
BL
Handset
Initial setting
Back Select
K
d
BL
Message alert
Back Select
K
d
BL
Message alert
:Off
Back Save
K
d
BL
PQQX13982YA.book Page 17 Friday, January 23, 2004 10:02 AM
To Next Page
Loading...
