42
Wall Mounting
This unit can be mounted on a wall phone plate.
1 Press the tabs in the direction
of the arrows (1), then remove
the wall mounting adaptor (2).
2 Connect the AC adaptor.
• Fasten the AC adaptor cord to
prevent it from being
disconnected.
3 Tuck the telephone line cord
inside the wall mounting
adaptor, then push the adaptor
in the direction of the arrows
(1 and 2) while pressing the
tabs.
• The word “UP WALL” should face
upward.
4 Connect the telephone line
cord. Mount the unit, then slide
it down.
• Raise the antenna.
5 To charge the handset battery:
Place the handset on the base unit.
• The unit beeps once and the
CHARGE indicator lights.
2
To Power Outlet
Hook
2
1
PQQX13982YA.book Page 42 Friday, January 23, 2004 10:02 AM
To Next Page
Loading...
