Useful Information
For assistance, please call: 1-800-211-PANA(7262)
51
Wall Mounting
This unit can be mounted on a wall phone plate.
1 Press the tabs in the direction
of the arrows (1 ), then remove
the wall mounting adaptor (2).
2 Connect the AC adaptor.
• Fasten the AC adaptor cord to
prevent it from being
disconnected.
3 Tuck the telephone line cord
inside the wall mounting
adaptor, then push the adaptor
in the direction of the arrows
(1 and 2) while pressing the
tabs.
• The word “UP WALL” should face
upward.
4 Connect the telephone line cord.
Mount the unit, then slide it
down.
• Raise the antenna.
5 To charge the handset battery:
Place the handset on the base
unit.
• The unit beeps once and the
CHARGE indicator lights.
2
To Power Outlet
Hook
2
1
PQQX13984YA.book 51 ページ ２００４年３月１５日 月曜日 午前８時２６分
To Next Page
Loading...
