Panasonic KX-TG2583ALS - Setting the Auto Talk Feature

15
Preparation
Setting the Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset off
the base unit without pressing (TALK). If you want to use this feature, turn
the feature ON by programming. Your phone comes from the factory set
to OFF.
Make sure the unit is in the standby mode initially.
1
Press (FUNCTION/EXIT/CH).
2
Press (Å) or (Ä) repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT (É) (Yes key).
4
Press (Å) or (Ä) repeatedly until the arrow
points to “Talk switching”.
5
Press FWD/EDIT (É) (Yes key).
6
Press (Å) or (Ä) to select “On” or “Off”.
7
Press FWD/EDIT (É) (Save key).
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•In order to view Caller ID information before answering a call, leave the Auto Talk
feature OFF.
Auto talk
:On
H Program
GF H =Yes
Set line mode
H Talk switching
GF H =Yes
Auto talk
:Off
GF H =Save
Auto talk
:On
GF H =Save