51
Cordless Telephone
Intercom
A 2-way intercom is possible between the handset and the base unit.
Paging the base unit from the handset
1
Handset:
Press (INTERCOM/CLEAR).
Talk to the paged party after
the beeps.
•“Intercom” is displayed.
2
Base unit:
When the other party’s
voice is heard, answer
using the MIC.
3
Handset:
To end the intercom, press
(INTERCOM/CLEAR).
Paging the handset from the base unit (Handset locator)
Using this feature, you can locate a misplaced handset.
1
Base unit:
Press (LOCATOR/INTERCOM).
•“Paging” is displayed on the
base unit.
•The handset beeps for 1 minute
and “Paging Press
INTERCOM” is displayed.
•To stop paging, press
(LOCATOR/INTERCOM)
again.
2
Handset:
Press (INTERCOM/CLEAR) to
answer.
•“Intercom” is displayed.
3
Base unit:
Talk into the MIC.
4
Handset:
To end the intercom, press
(INTERCOM/CLEAR).
To Next Page
Loading...
