To Next PageTo Next Page
Need help?Do you have a question about the Panasonic KX-TG4753B and is the answer not in the manual?
General| Type | DECT telephone |
|---|---|
| Intercom | Yes |
| Languages support | ENG, ESP |
| Dialing | Tone |
| Dialer location | Base & Handset |
| Phonebook capacity | 50 entries |
| Call list capacity phonebook | 5 |
| Mounting type | Desk |
| Product color | Black |
| Backlight color | White |
| Display diagonal | 1.8 \ |
| Frequency band | 1.9 GHz |
| Channels quantity | 60 channels |
| Mac compatibility | - |
| Ethernet LAN (RJ-45) ports | 0 |
| Battery type | AAA |
| Standby time | 11 h |
| Battery recharge time | 7 h |
| Number of batteries supported | 2 |
| Number of handsets included | 3 |
Weight and Dimensions| Base weight | 210 g |
|---|---|
| Handset weight | 150 g |
| Base dimensions | 150 x 117 x 67 mm |
| Handset dimensions (WxDxH) | 54 x 34 x 174 mm |
Guidelines for professional repair to prevent hazards.
Risk of explosion if battery is replaced incorrectly.
Details the power supply conversion and reset signal generation for the base unit.
Flowchart to diagnose and resolve common issues with the telephone system.
Diagnostic flowchart specifically for issues related to the Range Extender.
Steps to verify power supply issues in the base unit and range extender.
Procedure to troubleshoot issues with recording incoming messages on the base unit.
Steps to diagnose problems with playing back recorded messages.
Procedures to check battery charging status for base unit, handset, and charger.
Steps to verify and troubleshoot the wireless link between units.
Procedures for checking and identifying RF component issues.
Method to pinpoint defective RF components using known good units.
Flowchart for systematically checking RF performance and components.
Procedures for testing the operational range of the system.
Range testing procedures specific to the Range Extender.
Procedure to troubleshoot issues with receiving Caller ID information.
Step-by-step guide for replacing the LCD screen on the base unit.
Step-by-step guide for replacing the LCD screen on the handset.
Instructions for connecting and configuring the JIG for testing and adjustments.
Specifies adjustment standards and test points for the base unit.
Specifies adjustment standards and test points for the charger unit.
Specifies adjustment standards and test points for the range extender.
Specifies adjustment standards and test points for the handset.
Procedures after replacing ICs or crystals, including data download.
Instructions for replacing LLP package ICs, including preparation and removal.
Method for replacing flat package ICs using basic tools.
Comprehensive list of replacement parts for all units, including Part No. and description.
Replacement parts specific to the base unit.
Replacement parts specific to the handset.
Replacement parts specific to the charger unit.
Replacement parts specific to the range extender.
